|
| 7:00 | Registration | Lone Star Lobby |
|
| 8:00 | TechConnect World Innovation Conference - Plenary Keynotes | Lone Star E |
| Session chair: Jennifer Rocha, Dalia Yablon, Matthew Laudon, TechConnect ATI, US |
| National Health Security Innovation Initiatives
M. Stebbins, Advanced Technology International (ATI), US |
| DHS Converge
B. Henry, Department of Homeland Security, Science and Technology Directorate, US |
| Fireside Chat with DARPA
J. Thabet, DARPA, US |
|
| 8:30 | Advances in Critical Mineral Separation Technologies | |
| Session chair: Denis Prodius, Ames National Laboratory |
| Commercialization of the Acid-Free Dissolution Recycling (ADR) Technology
K. Stoll, Critical Materials Recycling (CMR), US |
| Protein-based rare earth separations
J.A. Cotruvo Jr., The Pennsylvania State University, US |
| Advancements in Fundamental Research for Lanthanide Separation
S. Pramanik, A. Ivanov, D. Jiang, I. Popovs, S. Jansone-Popova, Oak Ridge National Laboratory, US |
| Harnessing hydration and kinetic barrier differences in solid confinement for separation
C. Liu, University of Chicago, US |
| Enhanced Rare Earth Element Separation via Two-Ligand Solvent Extraction Process
S. Jansone-Popova, S. Pramanik, B. Evans, M. Lamb, T. Levitskaia, B. O’Kelley, P. Keller, ORNL, US |
| Computationally Guided and Experimentally Validated Design of Custom Chelators for Critical Mineral Recovery
S.M. Nations, S.E. Crawford, L.C. Burrows, W.A. Saidi, National Energy Technology Laboratory, US |
| Reaching for Targeted Leaching: Towards Selective Rare Earth Dissolution using Tailored Lixiviants
N.A. Thiele, Oak Ridge National Laboratory, US |
| Rare Earth Solvent Extraction Separation Using Multi Ligand Approach
T.G. Levitskaia, D.H. Altavilla, N.P. Bessen, S. Jansone-Popova, B. O’Kelley, P. Keller, Pacific Northwest National Laboratory, US |
| Copper extraction from primary sulfides using chemical and biological processes
J. Lee, J. Pearlman, S. Alvarado, Colorado School of Mines, US |
| Development and evaluation of bespoke gallium and germanium glycolipid ligands
C. Boxley, R. Stolley, C. Atkins, A. Moyes, G. Lindemann, RAMACO Carbon LLC, US |
|
| 8:30 | Micro Nano Electronics and Photonics Workforce Development Program - Joint Networking with Photonics | |
| Session chair: Alex Norman, Princeton University, US |
|
| 9:00 | Coffee Break | Lone Star Lobby |
|
| 9:00 | Sensors | |
| Session chair: Martin Poitzsch, Aramco Americas, US |
| Developing the next Generation of Sensors for Downhole Measurements
Q. Li, Oliden Technology, US |
| The guided-mode resonance sensor: Principles, technology, and applications
R. Magnusson, Resonant Sensors Incorporated, US |
| Opportunities, barriers, and future research directions for sustainable wastewater systems
N. Sharma, C. Price, S. Nimbalkar, Oak Ridge National Laboratory, US |
| High accuracy point sensors for continuous methane emissions monitoring
M. Doshi, Schlumberger-Doll Research Center, US |
| Novel techniques for single photon Raman spectroscopy
S. Kumar, Y. Li, T. Huo, H. Du, Y.P. Huang, Stevens Institute of Technology, US |
| Compact, rugged, field-deployable, self--powered, networked gas analyzers to monitor complex gas mixtures for food, environment, and transportation safety
J.T. Cremer, Adelphi Technology, Inc., US |
| A Low-cost, Portable Water Quality Monitoring System for Monitoring Water Quality in Real-time
V. Kayastha, C. Simmons, C. Jones, A. Neeson, B. Karmakar, W. Bowen, S. Gumm, A. Peters, D. Padilla, Brewer Science, Inc., US |
| Machine-learning enhanced gas sensor technology for complex odor identification and classification
D. Puglisi, K. Montelius, E. Tavaglione, S. Tsubota, B. Fabbri, J. Eriksson, I. Shtepliuk, Linköping University, SE |
|
| 9:00 | SPM Nanomechanical Measurements | |
| Session chair: Jason Killgore, National Institute of Standards and Technology, US |
| Understanding cantilever motion in sub-resonance photothermal force curves for improved nanomechanical measurements on viscoelastic polymers
A. Deolia, A. Raman, R. Wagner, Purdue University, US |
| Rapid nanomechanical mapping with photothermally actuated atomic force microscopy
J.D. Adams, H. Gunstheimer, G. Fläschner, H. Hölschner, B. Hoogenboom, Nanosurf, CH |
| A high-fidelity, labeled dataset for soft viscoelastic AFM nanomechanical properties
R.J. Sheridan, I. Saito, L.C. Brinson, Duke University, US |
| Improving AFM Young’s Modulus Measurements with Indentation Informed Bounds for Tip Geometry Fitting
L.J. Kirsch, J. Killgore, G.J. Rodin, F. Mangolini, University of Texas at Austin, US |
| Exploring the effect of topological confinement in polymer nanocomposite via AFM nanomechanical mapping
I. Saito, R.J. Sheridan, D. French, S. Zauscher, L.C. Brinson, Duke University, US |
|
| 9:00 | Energy Storage: Beyond Batteries I | |
| Session chair: Imre Gyuk, U.S. Department of Energy, US |
| Solving Grid Challenges with A-CAES: A Scalable Solution for Long-Duration Energy Storage in the US
D. Tuel, Hydrostor, CA |
| Underground Pumped Storage Hydroelectric using Salt Domes
W.M. Taggart IV, Cavern Energy Storage, LLC, US |
| Innovative Long-Duration Energy Storage: Operational Insights and Grid Applications of Advanced Rail Energy Storage
M. Gautam, D. Wu, C. Wiggins, R. Rebich, Pacific Northwest National Laboratory, US |
| ThorCell: Revolutionizing Energy Storage and Carbon Capture with Bio-Derived Innovation
C. Mbata, Y. Ukwu, J. Onyeizu, S. Ezumba, Kunfirm Technologies, US |
| Techno Economic Assessment of Moving Particle Thermal Energy Storage Technology for Grid and Process Heat Applications
L.P. McLaughlin, Sandia National Laboratories, US |
| Evaluation of Load Shifting in a Heat Pump System with Thermal Energy Storage for Both Heating and Cooling
Y. Qiao, Z. Li, L. Wang, B. Shen, K.R. Gluesenkamp , X. Liu, Oak Ridge National Laboratory, US |
| Decarbonizing Industrial Process Heat: Steam Generation with Integrated Energy Storage
F. Bassetti, U. d'Agostino, Magaldi Technologies LLC, Magaldi Green Energy, US |
| GridStar Flow, Design for Manufacturing at Volume and Scale: Lessons Learned from 1MW, 10-hr Pilot at Ft. Carson, Colorado
D. Petcovic, Lockheed Martin Energy, US |
|
| 9:30 | Biomaterials and Medical Devices II | |
| Session chair: Joe Skraba, University of Texas at Austin, US |
| To Be Announced
S. Whitlock, Dynamic Light, US |
| Biosensor-Based Diagnostics & Monitoring
Z.R. Baird, BioMEMS Diagnostics, Inc., US |
| Novel Device to Measure Serum Opioid Concentration in Real Time
M. Lucci, K. Walker, A. Dixon, Runatek, US |
| Ocular ultrasound-based approach to non-invasive intracranial pressure monitoring
G. Herrnstadt, G. Oland, I.O. Emeruwa, N. Parikh, P. Vespa, CranioView, US |
| Sonic Med Science (SMS)
V. Chaganti, M. Cheruvu, Akshara Yantra LLC, US |
| Next generation incubator to help premature babies safely develop outside mother’s womb
K. Rodriguez, Vitara Biomedical, US |
|
| 9:30 | Fuel Cell & Electrolyzer Component Development | |
| Session chair: John Kopasz, Argonne National Laboratory, US |
| Highly durable low-cost catalysts derived from zeolitic imidazolate framework for proton exchange membrane fuel cell applications
D.-J. Liu, Argonne National Laboratory, US |
| Single Metal Site Catalysts for Sustainable and Clean Hydrogen Energy
G. Wu, Washington University in St. Louis, US |
| *STUDENT HONORABLE MENTION* Bubble-Printing Synthesis of High-Entropy Alloys for Efficient Hydrogen Evolution Catalysis
M.-F. Hsieh, A. Swain, Y. Zheng, The University of Texas at Austin, US |
| Resolving Fundamental Challenges of Graphene Integration in Proton Exchange Membrane Fuel Cells
P. Carmichael, S. Kutagulla, Y. Lee, D. Akinwande, University of Texas at Austin, US |
| Transistor Sensors for PEM Fuel Cell Degradation Monitoring and PFAS Regulation
D. Dong, Rowan University, US |
| Facilitating hydrogen adoption with innovative hydrogen gas sensors for prognostics of industrial assets
R.A. Potyrailo, GE Vernova Advanced Research Center, US |
|
| 9:30 | Biomass & Renewable Carbon Sources | |
| Session chair: Tim Barckholtz, ExxonMobil, US |
| Advancing Winter Camelina for Biofuels
L. DePauw, Cargill, CA |
| Biorefining perennial sorghum: Sustainable bio-based materials
R.W. Jessup, Texas A&M University, US |
| From Chitin to Sustainable Solutions: Biopolymers for a Circular Future
J.L. Shamshina, R. Panackal Shibu, A. Zannat, Texas Tech University, US |
| To Be Announced
C. Quiroz-Arita, Sandia National Laboratories, US |
| To Be Announced
M. Young, Chevron, US |
|
| 9:30 | Emerging Methods for Materials Design with Artifical Intelligence II | |
| Session chair: Nobuyuki N. Matsuzawa, Panasonic, US |
| Direct Inverse Analysis of Machine Learning Models for Desings of Molecules, Materials, and Processes
H. Kaneko, Meiji University, JP |
| Revolutionizing Materials Science: Accelerating Discovery and Innovation with LQMs
T. Mustard, T. Sours, A. Singh, O. Allam, M. Cormier, A. Xiao, SandboxAQ, US |
| Surrogate modeling with finite-element-based physics-informed neural networks
R.B. Sills, P. Sunil, M. Vasoya, Rutgers University, US |
| Better Together: Combining Machine Learning and Physics-Based Models to Accelerate Product Development
S.D. Edkins, Citrine Informatics, US |
| Reactivity of Detached XLi₆ Nanoclusters with SEI Components: A Computational Framework for Lithium-Ion Battery Stability
F.A. Soto, The Penn State University-Harrisburg, US |
|
| 9:30 | Nanoengineered Surfaces: Fluidic and Thermal Applications | |
| Session chair: Chih-Hao Chang, University of Texas at Austin, US |
| Drag Reduction with High-Performance Superhydrophobic Surfaces Under Motorboat
C.-J. Kim, University of California, Los Angeles, US |
| From fundamentals of crystallization fouling on nanomaterials to rational design of scalephobic surfaces
T.M. Schutzius, J. Schmid, T. Armstrong, University of California, Berkeley, US |
| Engineering Liquid-Infused Surfaces with Scale-Dependent Roughness
R. Chrostowski, F. Mangolini, The University of Texas at Austin, US |
| Novel gel polymer electrolytes for Li-S batteries
B. Fenelon, J.P. Trigueiro, R.L. Lavall, G.G. Silva, Universidade Federal de Minas Gerais, BR |
| Aluminum oxynitride films for use in power electronics and advanced packaging
J. Schmitt, M.D. Healy, M. Khosravi, H. Bartzsch, M. Gittner, B.J. Soller, Nitride Global, US |
| Low Thermal Conductivity of a Multilayer Titanium Carbide (Ti3C2TX) MXene Nanosheet Measured Using the Raman Optothermal Technique
T.B. Limbu, J.V. Thomas, F. Yan, University of Houston-CL, US |
|
| 9:30 | Synthesis and Nanoscale Phase Behavior | |
| Session chair: Jodie Lutkenhaus, Texas A&M, US |
| Highly Efficient Compatibilizers for Mechanical Recycling of Polyolefin-containing Mixed Plastic Waste
C.J. Ellison, University of Minnesota, US |
| Novel Uses of Grubbs-Catalyzed Polymerization of DCPD in the Petroleum Industry
T. Nedwed, P. Brant, D. Jack, B. Heller, Safety Harbor Corp, US |
| Harnessing dynamic adhesion within amine-functionalized polyolefins to create high performing and longer-lasting self-healing bonding materials for cleaner industrial applications
D.J. Gilmour, S.G. Hatzikiriakos, L.L. Schafer, A2O Advanced Materials Inc., CA |
| Advancing Bio-Inspired Hybrid Composites: Synergistic Optimization of Hierarchical Fibrous Architectures for Lightweight and Multifunctional Engineering
P.C. Lee, Univerity of Toronto, CA |
| *STUDENT ABSTRACT WINNER* Studying Hyperuniform Structures and Entropic Phase Separation in Polymer-Grafted Nanoparticles
A. Gul, M. Muzzammil Mohammad, M. Bockstaller, K. Matyjaszewski, A. Karim, University of Houston, US |
| *STUDENT ABSTRACT WINNER* Biomimetic organogels with phase-separated bicontinuous betworks for superior mechanical performance
J. Bao, J. Yang, D. Fan, The University of Texas at Austin, US |
|
| 9:30 | Synthesis of Mxene, Novel 2D Materials and Applications | |
| Session chair: Anirudha Sumant, Argonne National Laboratory; Babak Anasori, Purdue University, US |
| To Be Announced
B. Anasori, Purdue University, US |
| Technological Breakthroughs in MXene Engineering: Advancing Synthesis and Applications through Argonne MXene Innovations
S.P. Adhikari, S.P. Muhoza, Z.D. Hood, ANL, US |
| MXene Enabled E-textiles and Wearables
A. Inman, Mantel Technologies, US |
| Superlubricity: A quest for long lasting solid lubricant
A. Sumant, Argonne National Lab, US |
| Unlocking the Versatility of Graphene Oxide: Superlubricity in Controlled Atmospheres and High Durability in Ambient Conditions
M. Choi, J. Jang, A.V. Sumant, J. Kim, Y. Jang, S. Kim, Pusan National University, KR |
|
| 9:30 | Future Innovators Panel - Student/Postdoc Leaders Summit | |
| Session chair: Matthew Hull, Virginia Tech, US; Jeremy Pitts, Activate Houston, US |
| J. Pitts, Activate Houston, US |
| A. Busch, University of Texas at Austin, US |
| G. Cossio, Nanoscale Labs, US |
| C. Lawrence, Energy Transition Ventures, US |
|
| 9:30 | Biopharmaceutical Manufacturing Symposium II | |
|
| 10:30 | Future Innovators Keynote & Student/Postdoc Pitch Contest for Emerging Entrepreneurs | |
| Session chair: Matthew Hull, Virginia Tech, US; Jeremy Pitts, Activate Houston, US |
|
| 12:00 | Lunch Break | On own |
|
| 1:00 | TechConnect World, SBIR/STTR Pavilion - Expo Opens | JW Grand Ballroom |
|
| 1:00 | Micro Nano Electronics and Photonics Workforce Development Program - Career Awareness Fair | |
| Session chair: Alex Norman, Princeton University, US |
|
| 1:30 | Biosensors | |
| Session chair: Sehoon Chang, Aramco Americas, US |
| E-Tattoos and E-Skins Bridging Humans and Robots
N. Lu, The University of Texas at Austin, US |
| Selective detection of BTEX compounds using a non-selective photoionization detector
N. Barua, I. Williams, T. Hutter, The University of Texas at Austin, US |
| A hybrid micromachined pico-calorimeter for measuring cellular metabolism with applications in antimicrobial susceptibility testing
J. Zheng, H. Yang, A. Strandberg, W. Ireland, D.J. Needleman, J.J. Vlassak, Harvard University, US |
| Pressure Smart Watch Biosensor Using Equitable Bioimpedance Modality and AI
N. Kumar, S. Leo, J. Zhao, S. Lalande, D. Akinwande, University of Texas at Austin, US |
| Optoelectric Raman Nanosensors: Overcoming Intrinsic Limit in Nano-biosensing
B. Lian, H. Li, J. Guo, D. Fan, The University of Texas at Austin, US |
| A Novel SPEEK-based Proton Exchange Membrane Fuel Cell Sensor for Chloroform Vapor Detection
R. Rodriguez, A. Mendoza, M.I. Rahman, G.M.M. Hossain, C. Carrillo, A.H. Jalal, The University of Texas Rio Grande Valley, US |
|
| 1:30 | Innovations in Decarbonizing Steel | |
| Session chair: John Kopasz, Argonne National Laboratory, US |
| ArcelorMittal's Key Decarbonization Initiatives
A. Morelato, ArcelorMittal, US |
| Evaluating acidic aqueous solutions for electrochemical deposition of metallic iron
B.J. Ingram, Y. Sun, J. Luo, R. Akolkar, J.G. Connell, Q. Liu, Z. Yang, Argonne National Laboratory, US |
| Pathways to Low Temperature Electrolysis of Iron Oxides at Scale
P.A. Kempler, A.C. Goldman, R. Shekhar, A. Konovalova, E. Rahman, University of Oregon, US |
| Hydrogen Plasma Rotary Kiln Furnace Reduction of Iron Ores
J. Kopasz, Argonne National Lab, US |
| Direct hydrogen reduction of iron ore concentrate and net-shape fabrication of linear cellular alloy steels
J. Kacher, G. Kennedy, S. Saiyara, N. Baltodano, A. Balandin, N. Thadhani, Georgia Institute of Technology, US |
| Engineered Biocarbon Materials for EAF Decarbonization
M. Mlinar, B. Spigarelli, M. Young, Natural Resources Research Institute, US |
| Inclusion of waste glass, manufactured sand, fly ash, and slag in the context of circular economy practices for infrastructure durability and resilience and decarbonization of cement/steel industries
A.O. Sojobi, R. Taiwo, B.A. Salami, City University of Hong Kong, HK |
|
| 1:30 | Biorefineries for Negative Emissions | |
| Session chair: Carlos Quiroz-Arita, Sandia National Laboratories, US |
| Cellulosic biofuels: Addressing cost and land challenges while maximizing climate benefits
L. Lynd, Dartmouth College, US |
| State-level biomass waste resource availability and GHG emission mitigation strategies
F. Naaz, J. Zhang, U. Singh, T.R. Hawkins, Argonne National Laboratory, US |
| Soil amendments as value-added products from Integrated Pulp and Paper Biorefinery: An Environmental and Economic Analysis
A. Banboukian, D. Kamath, S. Nimbalkar, J. Cresko, Oak Ridge National Laboratory, US |
| Biomass Based Ethylene – The Foundation a Low Carbon Future
F. Liotta, Petron Scientech Inc, US |
| Harnessing Bioelectricity from Organic Waste: A Microbial Fuel Cell-Enhanced Compost System for Renewable Energy Generation
S. Chen, P.N. Aquino, K. Hoang, Ohlone College, US |
| ReMINING, Revolutionizing Waste Management, Perfect Recycling
D. Rose, K. Sharp, Brothers Services Group LLC, US |
| Enhancing Formate Fermentation with Hydrogen Supplementation for Sustainable Biomanufacturing
B. Zakaria, J. Panich, R. Swart, V.S. Nogue, C. Johnson, E. Sundstrom, Lawrence Berkeley National Laboratory, US Department of Energy, US |
| Enhancing Sustainability in Pea-Based Biorefineries: Producing Isobutanol from Pea Starch
R. Buitrago-Tello, U. Lee, M. Menegay, J. McVay, Argonne National Laboratory, US |
|
| 1:30 | Applications of AI-based Materials Design Methods | |
| Session chair: Jan-Willem Handgraaf, Siemens, US |
| Accelerating Materials Innovation with an Integrated Computational Materials Engineering (ICME) Framework
S. Arumugam, C. Bream, Ansys, UK |
| Designing extreme-performance materials for air, land, sea and space with advanced computation
T. Gardner, Cambium, US |
| Applying Artificial Intelligence (AI) to build new generation gas sensors to positively impact society
R.A. Potyrailo, S. Shan, T. Wang, GE Vernova Advanced Research Center, US |
| Machine-Learning-Driven Predictive 3D Ramified Foam Fabrication and Mechanistic Understanding
Y. Liu, The University of texas at austin, US |
| Sustainable Graphite Production from Plastic and Biomass: a Modeling Approach
T. Hossain, L. Toba, Idaho National Laboratory, US |
|
| 1:30 | Nanoengineered Surfaces: Optical, Mechanical, and Interfacial Properties | |
| Session chair: Chih-Hao Chang, University of Texas at Austin, US |
| Machine Learning-Driven Design of Optoelectronic Surfaces
P. Leu, University of Pittsburgh, US |
| Roll-to-roll and seamless molds: our journey to bring nanostructured surfaces to scale
S.J. Furst, Smart Material Solutions, LLC, US |
| *STUDENT HONORABLE MENTION* Effect of Geometry and Material Properties on the Mechanical Properties of Nanopillar Arrays
M. Kepenekci, K.-C. Chien, K.-S. Lee, C.-H. Chang, The University of Texas at Austin, US |
| Polymer-Encapsulated Tetraalkylammonium Orthoborate Ionic Liquids as Lubricant Additives in Non-Polar Oils
J. Yan, F. Mangolini, The University of Texas at Austin, US |
| *STUDENT ABSTRACT WINNER* Novel Surface Coatings for Addressing Structural and Interfacial Issues of Lithium Metal Batteries
K.V. Carballo, X. Meng, University of Arkansas, US |
| Laser Induced Surface Modifications for Electronic and Optical Devices
M. Simmons, R. Malay, Intellivation LLC, US |
|
| 1:30 | Sustainable Materials Applications | |
| Session chair: Chris Ellison, University of Minnesota, US |
| Organic Batteries for a More Sustainable Future
J.L. Lutkenhaus, Texas A&M University, US |
| Development of next-generation biosensors – discussing the permselective polymer membranes that make this possible
M. Tapsak, Glucotrack Inc., US |
| Enabling the Connection between the Structure and Future Composite Component Performance Through High-Resolution Inspection
D. Jack, Baylor University, US |
| Developing strong and ductile biomass-based materials toward sustainability
B. Chen, T. Li, University of Maryland College Park, US |
| Scaled up ambient pressure synthesis of cubic gauche polymeric nitrogen
Z. Iqbal, X. Wang, T.G. Manning, Carbomet LLC in partnership with New Jersey Institute of Technology (NJIT) and US Army ARDEC-Picatinny, US |
| Performance of post consumer recycled transparent low density polyethylene packaging
M. Rutkevičius, S. Zhong, C. Kammer, T. Scott, M. Hetrich, S. Neupane, ABB Inc., US |
|
| 1:30 | Novel Critical Material Manufacturing and Scale-up Approaches | |
| Session chair: Alison Fritz, National Energy Technology Laboratory, US |
| The Minerals to Metals Supply Chain Research Facility (METALLIC): Accelerating Critical Mineral and Material Technology Deployment & Innovation
T.J. Tarka, National Energy Technology Laboratory, US |
| Exploiting rare-earth elements to enhance properties of next-generation structural alloys: processing to manufacturing and properties
M. Taheri-Moudavi, B. Webler, J. Kitchin, A.I. Torres, Carnegie Mellon University, US |
| Rare earth metals production using alternative feedstock that eliminates HF
A. Karati, H. Parmar, T. Riedemann, M. Besser, D. Prodius, I.C. Nlebedim, Ames National Laboratory, US |
| Advances in Modeling Capabilities for Critical Mineral Separation Technologies: A PrOMMiS Overview
A. Garciadiego, M. Zamarripa, A. Dudchenko, A. Fritz, N. Tran, C.D. Laird, D. Fardis, N. Sahinidis, T. Tarka, NETL, US |
| Geochemistry & Integration
J.C. Kennedy, ThREE Consulting / Caldera Holding LLC, US |
| Improving the Economics of REE Recovery from Phosphogypsum by Generating High-Value Coproducts
P. Zhang, H. Liang, A. Medley, T. Levitskaia, R. Riman, C. Tsouris, Y. Katsenovich, FIPR Institute, Florida Poly, US |
| Modernization of Conventional Critical Materials Production to Achieve Reduction in CAPEX, OPEX and the Scale of Process Systems
M.C. Hargett, K.M. Khozan, CVMR (USA) Inc., US |
| Exploiting REE Mineralization Through Attrition Scrubbing, Sortation, And Preferential Breakage: The Bear Lodge Project
C. Gorski, E. Spiller, Colorado School of Mines, US |
|
| 1:30 | Graphene & 2D Materials: Energy Storage Applications | |
| Session chair: Anirudha Sumant, Argonne National Laboratory; Babak Anasori, Purdue University, US |
| *STUDENT HONORABLE MENTION* Ultrahigh Electrostatic Energy Density in Au/2D-CuInP2Se6/Graphene Micro-Capacitor
R. Padhan, M. Susner, R. Rao, S.A. Kadam, A. Wali, R. Divan, W.C. West, A.V. Sumant, N.R. Pradhan, Jackson State University, US |
| Impact of hBN and Graphene Interlayers on the Dielectric Properties of Flexible Polymer Films
F. Hasan Likhi, I. Vlassiouk, A. Karim, University of Houston, US |
| Synergistic Design of Graphene-Enhanced X₂HgI₄ (X = Tl, Cu) Nanocomposites: Revolutionizing Thermochromic Smart Materials and High-Performance Solid Electrolytes
F. Soofivand, National Research Council-Nanoscience Institute (CNR-NANO) and NEST-Scuola Normale Superiore, IT |
| Computational Study of h-BN-Modified AGNRs for Advanced Energy Storage and Semiconductor Applications
R. Khandaker, J. Sarker Ayesha, B. Barman, Dhaka University of Engineering & Technology, BD |
| Optimizing Deposition of Platinum Nanoparticles on Functionalized Graphene Oxide
M. Mahin, N. Ahamad, H. Fairbrother, Shahjalal University of Science and Technology (SUST), BD |
| Recent Development of High-density Energy Storage Thin Film Dielectric Capacitors with Record Efficiency using Polymers and 2D Materials
N. Pradhan, Jackson State University, US |
|
| 1:30 | Photonics Panel - Crossing the Chasm: How to Successfully Navigate the Startup Valley of Death | |
| Session chair: Christine Galib, Princeton University, US |
| Welcome and Indroductory Remarks from APT
C. Galib, Princeton University, US |
| J. Deuley, team b., US |
| A. Bertram, Edna Ventures, AU |
| N. Thompson, HTXSportsTech, US |
|
| 2:15 | Photonics Lightning Talks - Spotlight on Cutting-Edge Photonics Technologies | |
| Session chair: Christine Galib, Princeton University, US |
| 2:20 | Scalable, Multi-Functional Nanocomposites: Unlocking Photonics and Clean Energy Applications
S. Daniel, Materium Technologies, US |
| 2:30 | 3D Printed Plyometric GRIN Lenses by Partial Polymerization
J.D. Engelhardt, J.F. Stanzione, R.V. Chimenti, Rowan University, US |
| 2:40 | Reproducible synthesis of gold nanocubes as templates for inverse plasmonic photocatalysts
J. Cabezas Parra, T. Ayer, J.M. Notestein, D.F. Swearer, Northwestern University, US |
| 2:50 | All-optical cross-bar switching on chip made of periodical poled lithium niobate based on quantum zeno blockade
J.X Liu, Z. Li, Y.P. Huang, Stevens Institute of Technology, US |
| 3:00 | Robust pattern retrieval in a photonic neural network
S. Kumar, M. Katidis, K. Musa, Z. Li, F. Long, C. Qu, Y.P. Huang, Stevens Institute of Technology, US |
| 3:10 | A multimodal nanoporous silica optical waveguide for industrial toxic gas monitoring
N. Barua, L. Menges, T. Hutter, The University of Texas at Austin, US |
| 3:20 | The Transformation of Light into Matter
J.W. Vegt, Eindhoven University of Technology, NL |
| 3:30 | Thin film lithium niobate: the ideal material for scalable high-performance photonic components and PICs
P. Dianat, Quantum Computing Inc, US |
|
| 3:30 | Photonics Fireside Chat - Making Photonics Tech to Market: Founders’ Perspectives | |
| Session chair: Christine Galib, Princeton University, US |
| D. McGee, College of New Jersey/DJM Photonics, US |
| S. Daniel, Materium Technologies, US |
|
| 1:30 | Tissue Engineering and Disease Modeling I | |
| Session chair: Thomas Webster, Interstellar Therapeutics, US |
| 3D Bioprinting of Patient-Specific Regenerative Implants
T.D. Stocco, Brazil University, BR |
| Eliminating Medical Device Infections Without Antibiotics: From Human Clinical Trials to New Models
T.J. Webster, Brown University and Hebei University of Technology, US |
| A comparison between mechanical and biological performance of 3D Bioprinting and Cryo(Bio)printing of soft hydrogels reinforced with micro and nanofibers layers
M.C.S. Silva, M.C. Santos, M.V. Santana, F.R. Marciano, A.O. Lobo, Federal University of Piauí, BR |
| Microfluidic Osteoarthritis-on-a-Chip: Evaluating Adverse Effects of Tanezumab in Co-Culture
H. Mirazi, S. Wood, University of New England, US |
| Facing the Future: Tissue Engineered Treatment of Craniofacial Bone Injuries
W. Grayson, Johns Hopkins University, US |
| Advances in surface treatments for biomedical applications
F.R. Marciano, Federal University of Piauí, BR |
|
| 1:30 | SPMConnect: Cells, Biomolecules, and Biomaterials II | |
| Session chair: Simona Patange, National Institute of Standards and Technology, US |
| The FluidFM® Technology in Temporally Resolved Single Cell Transcriptomics, Genome Engineering, and Beyond
A. Kerjouan, S. Mailand, A. Migenda, K. Keevend, T. Ypma, S. Connolly, L. Rizzo, R. Lafleur, M. Milla, D. Ossola, T.A. Beyer, Cytosurge, CH |
| Non-Contact Charge Transfer Measurement of DNA Nano-Devices utilizing AFM
R. Luna, D. Runsewe, N. Austin-Bingamon, D.C. Binod, T. Betancourt, Y. Miyahara, Texas State University, US |
| High-speed atomic force microscopy: A structural and dynamic tool for visualizing single-molecule biological processes
Y.C. Lin, University of Texas at Austin, US |
| Nanoinjection of extracellular vesicles to single live cells by robotic fluidic force microscopy
K.D. Kovács, T. Visnovitz, T. Gerecsei, B. Peter, S. Kurunczi, A. Koncz, K. Németh, D. Lenzinger, K.V. Vukman, A. Balogh, I. Rajmon, P. Lőrincz, I. Székács, E.I. Buzás, R. Horvath, HUN-REN Centre for Energy Research, HU |
|
| 3:00 | SPMConnect: Novel Methods | |
| Session chair: Peter Grutter, McGill University, CA |
| Tracking charge dynamics by high speed and time resolved Kelvin Probe Force Microscopy
L. Collins, Oak Ridge National Laboratory, US |
| High-resolution mapping of chemical, electrical and mechanical properties via gated sub-resonant intermittent contact AFM
B. Pittenger, C. Li, S. Hu, P. De Wolf, Bruker, US |
| Depth integration of signal in photothermal AFM-IR and complementary methods
G. Haugstad, Univ. of Minnesota, US |
| Breaking the Optical Diffraction Limit with SPM: an Overview of nanoIR Capabilities
C.A. Phillips, Q. Hu, C. Li, P. De Wolf, Bruker Nano, US |
|
| 1:30 | Energy Storage: Safety | |
| Session chair: Imre Gyuk, U.S. Department of Energy, US |
| Advanced Safety and Reliability Considerations for Large-Scale Energy Storage Systems
A. Gupta, M. Jaiswal, Northeastern University, US |
| Safety Considerations for Battery Energy Storage Systems: From Conception to Culmination and Beyond
R. Spray, S. Lele, Exponent, US |
| Fire Safety for Mobile Robots functioning in Chaotic Conditions
W.F. Hederman, Collegiate Robotic Football Conference, US |
| Fault Management Software to Increase BESS Reliability and Safety
B. Ramamurthy, D. Sblendorio, Critical Loop, Inc., US |
| Self-Quenching Battery Pack: D^3 Concept of Detect, Direct, and Douse to Contain Thermal Runaway
S. Pannala, T. Li, L. Chen, D. Pelletier, SABIC, US |
| The Impacts of Procedure in the FMEA of Lithium-Ion Batteries
F.S. Gray, E. Cheever, W.S. Tang, J. Jeevarajan, UL Research Institutes: Electrochemical Safety Research Institute, US |
|
| 3:30 | Energy Storage: Materials / Components & Power Electronics | |
| Session chair: Imre Gyuk, U.S. Department of Energy, US |
| 1.8MW 13.8kVAC to 1kVDC Solid State Transformer (SST) for Energy Storage Systems
A. Kelinsky; T. Beechner, RCT Systems, US |
| Advanced Fuel Cell Power Converter (AFCPC)
G. Santamaria, A. Jathar, M. Simon, RockeTruck, Inc., US |
| Development of Cost-Effective Energy Storage Systems by Earth Abundant Materials for Long Duration Storage
R. Amin, Oak Ridge National Laboratory, US |
|
| 4:00 | TechConnect Innovation Showcase Reception, Poster Session II (4:00 - 6:00) | |
|
| 4:00 | SBIR/STTR Pavilion Reception | |
|
| 4:00 | Sensors - Posters | |
| Nanophotonic Quantum Entanglement for Advanced Spectroscopy and Biosensing Applications
J.U. Gadea Morales, Applied Physics & Materials Science at Caltech, US |
| *STUDENT HONORABLE MENTION* Development of a novel optical fiber probe sensor for real-time ethanol monitoring
T.-A. Lee, T. Hutter, The University of Texas at Austin, US |
| Investigation of the Stability of a Simplified Model of the Lipid Bilayer Membrane of a Chemo-Stressed Cancer Cell under an Applied Electric Field
Y. Musa, K. Tantawi, M. Colson, A. Adams, Motlow State Community College, US |
| *STUDENT HONORABLE MENTION* On-scalp printing of personalized electroencephalography e-tattoos
P. Vidal, University of Texas at Austin, US |
| Next-Generation Wearable Device for Noncontact Voltage Detection
A. Quinn, E. Saenz, L. Bryand, O. Caglayan, University of Incarnate Word, US |
| Fiber Optic Sensors Embedded in Clothing for Rehabilitation Patient Monitoring
A.V. Hutter, T. Hutter, The University of Texas at Austin, US |
| Rapid Nanoprobe Biosensor for the Detection of SARS‐CoV‐2
H.A. Alhadrami, G.A.R.Y. Suaifan, M.M. Zourob, King Abdulaziz University, SA |
|
| 4:00 | Sustainability & Efficiency Innovations - Posters | |
| From Ground to Grid: The Environmental Footprint of Minerals in Renewable Energy Supply Chains
G. Swami, K. Sheth, D. Patel, ICF Inc, US |
| *STUDENT ABSTRACT WINNER* Advanced Flow Optimization Solution for Winter Oil and Gas Well Performance
J. Ali Khan, M. Irani, M. Cokar, PetroND Energy Solutions (University of North Dakota), US |
| Advanced Net Zero & Zero Carbon Engine System
D.A. Dudzik, International Association for the Advancement of Steam Power, US |
| Innovative Bioprocess for Antimicrobial Biosurfactants and Polyphenol-Based Therapeutics
A. Badis, A. Tared, S. Hadjala, E. Kamel, F. Zohra Ferradji, University of Blida 1, DZ |
| H2S Poisoning of an Anion Exchange Membrane CO 2 Electrolyzer
Z. Liu, H. Yang, M. Resch, C. David, C. Hahn, Dioxide materials, US |
| Experimental study, finite element analysis and validation of mechanical properties, fracture/failure characteristics in aluminum and magnesium light alloys dissimilar welding joint with steel/aluminum filler material
R. Islam, University Malaysia Pahang (UMP), Malaysia, BD |
| A Super Hybrid Internal Combustion Eine Retrofit Technology
M.J. Yan, Yan Engines, LLC, US |
| Environmental sustainability analysis of a novel glass-fibre composite biogas scrubbing system for industrial-scale application in developing countries
R. Rasheed, F. Tahir, F. Tahir, Government College Univeristy Lahore, PK |
| *STUDENT ABSTRACT WINNER* Life Cycle Assessment of Amine Solvents for CO₂ Capture: A Comparative Analysis of MEA and AEEA for Sustainable CO2 Capture
M. Sharifi Paroushi, N. Saadati, S. Abbasi Sharif, N. Mahmoudzadeh Vaziri, A. Golzary, Missouri University of Science and Technology, US |
| Quantitative Infrared Thermography for Building Envelope Energy Audits
P. Mukhopadhyaya, M. Mahmoodzadeh, V. Gretka, University of Victoria, CA |
|
| 4:00 | AI for Materials Design - Posters | |
| Automated Synthesis and Precision Growth of 2D Materials for Next-Generation Electronics
M.A Vignon, Analyticaxpress, US |
| A Review of AI-Enhanced Materials for Sustainable Energy Systems
H. Saha, A.K. Saha, Haldia Institute of Technology, IN |
|
| 4:00 | Engineered Surfaces - Posters | |
| Sustainable, Smart Corrosion Protection
B.P. Pearman, X. Zhang, D. Campbell, V. Scarborough, S. Dickey, SynMatter, US |
|
| 4:00 | Polymers - Posters | |
| Activated carbon to improve the performance of membrane processes for the extraction and storage of emerging pollutants
S. Oukkass, I. Mourtah, R. Ouchn, I. Mechnou, I. El Yaakouby, N. Kamil, M. Hlaïbi, Hassan II University of Casablanca Aïn Chock Faculty of Sciences, Laboratory GeMEV, MA |
| Preparation, Characterization, and Application of Antibacterial Electrospun Nanofiber Mats
A. Adams, E.G William, H. Uddin, Coppin State University, US |
| Complete Recycling of Epoxies using Solar Energy Conversion
M. Finale, J. Logan, J. McCoy, Y. Lee, S. Chowdhury, New Mexico Institute of Mining and Technology, US |
|
| 4:00 | PFAS Treatment & Detection - Posters | |
| *STUDENT ABSTRACT WINNER* Kinetic and mechanism study of PFOS removal from water using micro-scale zero-valent iron (mZVI)
M. Ji, X.G. Meng, C. Christodoulatos, Stevens Institute of Technology, US |
| PFAS Adsorption Mechanism of SMC and Impacts on PFAS Bioaccumulation in Earthworms
R.A. Dickman, M. Donovan, CETCO, US |
| A "Drop-in" Treatment System for PFAS Impacted Liquids
A. Boettcher, T. Egner, C. Chidiac, DeployX Services, Inc., US |
| Total PFAS detection with advanced solid-state nanopore chips
Z. Xia, Goeppert LLC, US |
| A sustainable high-throughput solution for PFAS destruction
J. Brockgreitens, Z. Rogers, Claros Technologies, US |
|
| 4:00 | AI Innovations - Posters | |
| Harnessing AI: Bridging the Gap Between Innovators and Federal Grant Opportunities
K.M Cooper, V Palermo, Grant Management Associates, US |
| Cybersecure Smart Activated Mesh solution for animal detection & deterrence in a power substation based on AI
S. Chanda, R. Dubey, D. Patel, S. Vijay, SAM Analytic Solutions LLC., US |
| Driving Innovation with User Experience and Design: Uncovering Obstacles in Organizational Processes
Z. Yang, M. Karry, T-W Su, M. Hall, University of California, Santa Cruz, US |
| Robust and Portable Performance Datasets for HPC with Generative AI
M. Ali, A. Qasem, Texas State University, US |
| Large Language Models for High-Performance Computing
Z. Sadman, A. Qasem, Texas State University, US |
| Dynamic Data and AI driven Healthcare Billing Audit Framework
T. Ekin, L. Shaw, Texas State University, US |
| RoadRating: Realtime Safety Scoring of the Travel Paths
S. Das, Texas State University, US |
| Task-specific Evaluation for Biomedical Large Language Models (LLMs) for the HealthCare Industry
A. Dutta, Texas State University, US |
| Generative AI-Powered Synthetic Clinical Data for Accelerating AI Innovations in Clinical Workflow
F. Akkawi, M. Schumar, S. Kakade, S. Popuri, Northwestern University, US |
| Sustainability Intelligence: Transforming Corporate Risk Assessment and Detection with Generative AI
D. Wadhwa, S. Kakade, F. Akkawi, Northwestern University, US |
|
| 4:00 | Advanced Manufacturing - Posters | |
| Enhancing Physical Systems Resilience through Autonomous Engineering Design Framework in High-Tech Factories
C-Y Liu, O. Chong, A. Chatterjee, Y. Yang, O. Chong, Y. Li, Arizona State University, US |
| CLEANS: Cubesat for Low Earth orbit Asset Net and Sail disposal
E. Andrade, A. Banerjee, T. Courtois, B. Pumphrey, M. Vasquez, N. Rivera, J. Jarvis, B. Vinh, A. Shirwa, D. Rocha, J. Edwards, G. Baumann, J. Sanchez, Skyfall Space (student research team), US |
| Tele-Manufacturing: Engaging Workforce and Industry for the Future of Manufacturing
P.A. Blomquist, C. Lamorte, EWI, Inc., US |
| Digital Twin-Driven Semiconductor Training: AR/VR to Leverage Manufacturing Education
M. Brock, K. Challa, I. Alhmoud, B. Gokaraju, S. Aravamudhan, North Carolina Agricultural and Technical State University, US |
| Physical Properties of Nano- Scaled silver in Boron Nitride Matrix
A.M.I. Ibrahim, iThemba Labs, ZA |
| Metal-Organic Framework Crystal Growth in Microgravity
P.H. Irace, R.D. Reeves, M.S. Roberts, International Space Station National Lab, US |
|
| 4:00 | Graphene & 2D Materials - Posters | |
| Engineering Curcumin-assisted Black Phosphorus Nanostructures: An Effective Approach for Antibacterial Treatment and Photodynamic Therapy
F. Soofivand, CNR, IT |
| Enhancing IR photodetection in 2D-2D Heterostructure-Based WSe2/PdSe2 Field-Effect Transistors
N. Murugesan, R. Padhan, S. Yang, S.A. Kadam, A.V. Sumant, R. Divan, D. Rossenmann, N.R. Pradhan, Jackson State University, US |
| Harnessing Proton Irradiation for Precision Defect Engineering in 2D Materials
B. Ozden, Penn State Abington, US |
| Intercalation of polymer into Ti3C2 MXene Layers to Improve Supercapacitance
S.M.M. Alonzo, B.P. Bastakoti, North carolina A&T State University, US |
| Probing the Persistent Photoresponse in WS2 using Kelvin Probe Force Microscopy
S. Chen, W. Behn, W. Fu, C.P.Y. Wong, K.E.J. Goh, P. Grutter, McGill University, CA |
| Band-Tuned Nonlinear Optical Properties of Monolayer AgInP₂Se₆ and AgInP₂S₆
A. Subramani, B. Radatović, J. Luxa, C. Senthil, S. Mourdikoudis, S. David, Z. Sofer, University of chemistry and Technology, CZ |
|
| 4:00 | Microelectronics R&D - Posters | |
| In-memory computing using ReRAM arrays for 2-bit and 3-bit multipliers
J. Modasiya, M. Liehr, N. Cady, University at Albany, US |
| Heterogeneous AI Inference Platform for Energy-Efficient Large Language Models
S. Kim, S. Yi, Y. Jeong, C. Lee, C.S. Kim, Simplus Inc., US |
| Next-Gen UART: A Low-Power, Multi-Protocol Communication Core for IoT Applications
C.N.K. Choudary, C.T. Siddanth, Amrita Vishwa Vidyapeetham, IN |
| design,development and integration of fabless system on chip
G. Mamatha, V. Akshaya, jawaharlal technological university ananthapur, IN |
| 2-Mask NMOS (N-type Metal Oxide Semiconductor) Device Manufacturing, Design, & Fabrication For Workforce Development
E. Saucedo, N. Palana, SAN JOSE CITY COLLEGE (MESA PROGRAM), US |
| Digital Twins for Advanced Workforce Training and Semiconductor Manufacturing
K. Hong, I. Jha, N. Vatanshenas, C. Lee, A. Sunkad, A. Ashcroft, A. Ahmadi, R. Dhar, H. Mandadi, R.D. Melara, J.J. Mosquera, P.K. Stout, UC Irvine, US |
| A Review of Recent Advances in Heterogeneous Integration and Chiplet Technology
M.H. Haidari, Erie community college, US |
|
| 4:00 | Photonics - Posters | |
| Perovskite-type titanates as photocatalyst for wastewater treatment
S. Athira , S. Solomon, UNIVERSITY OF KERALA, IN |
| Success Stories Bridging Education and Industry: Photonics Programs at Stonehill College
C. Schnitzer, G. Gu, R. Adams, Z. Allard, B. Bronwyn, S. Erase, T. Seaward, M. Wendel, N. Ahmad, M. Altaai, L.J. Tandon, Stonehill College, US |
| Metalidar
B. Mirzapour, UMass, Amherst, US |
| Graphical Illustration for Scientific Communication in Quantum Photonics using Blender
R. Gonzales, S. Patel, S. Doan, G. Moody, UC Santa Barbara, US |
| Enhanced Tunable Optical Grating via Silica-Modified Magnetic Nanofluids
U. Soni, Charotar University of Science and Technology, IN |
| Light Processing Unit (LPU) Chip Development for Micro LED applications
E. Li, SiliconCore Technology, Inc., US |
| Multilayer and Plasmonic Electrodes for Transparent and Top-Emitting Organic Light-Emitting Diodes
S. Sreekumar, H. Pacheco, D. O’Carroll, Rutgers University, US |
|
| 4:00 | Tissue Engineering - Posters | |
| Investigating Brain Morphological and Cellular Changes Induced by Blast-Related Traumatic Brain Injury in a Mouse Model
A. Gomez, N. Alsbou, R. Wolf, M. Ahmad, M. Khandaker, University of Central Oklahoma, US |
| The Role Of 17-β-Estradiol In Sex-Specific Cytisine-Mediated Neuroprotection Against Parkinson’s Disease
N. Tan, G. Roger, P. Gauri, Z. Sara, S. Rahul, Cal Poly Pomona, US |
|
| 4:00 | Biomaterials & Medical Devices - Posters | |
| Spooky action at a distance: Neuromodulation, physiologic distress signals, and Limb Preservation
A.S. Raihane, G.M. Deusch, C. Liu, B. Nafajoa, D.G. Armstrong, Pasadena City College / UC Irvine, US |
| Nanomedicine - MQDMS - Multifunctional Quantum Dot Medical Solutions
A. Clavien, Maricopa Community Colleges, US |
| *STUDENT HONORABLE MENTION* In situ analysis of the degradation of alloplastic epidermal substitutes for burn treatment using optical spectroscopies
D. Juárez Bautista, M.C. Rodríguez Aranda, J.L. Ramírez García Luna, L.E. Alcántara Quintana, M.A. Martínez Jiménez, E.S. Kolosovas Machuca, Universidad Autónoma De San Luis Potosí (UASLP), MX |
| A Novel Media-Concentration Based Accelerated Hydrolytic Degradation Model for Biodegradable Polymers based on Time-Concentration Superposition Frameworks
A.E. Green, A.G. Byju, B. Haridas, Texas A&M University, US |
| Compact Silicon carbide Bio glass graft material for bone augmentation
R. Alfotawi, A. Elghannam, Dental faculty, King Saud University, SA |
| Multiphase Bioabsorbable Scaffold for Osteochondral Regeneration in Weight-Bearing Joints
J. Henstock, S. Nikfarjam, A. Haleem, M. Khandaker, University of Central Oklahoma, US |
| Chirality-Driven Enhancements in PNA Binding: Structural Insights and Applications
A.K Manukyan, CUNY Hostos Community College, US |
| 3D Printed Multi-material Nanocomposite Contact lenses for Color Blindness Correction
H. Butt, Khalifa University, AE |
| Bridging Gaps in Neurocare: Validation of FaaS as a Brainwave Neurosensing Technology
A. Bradford, C. DuBois, A.T. McDaniel, D. Cobble, L. Schroeder, W. Tseh, University of North Carolina Wilmington, US |
| Ex vivo and In vivo evaluation 3D-Printed PCL-based Bone Scaffolds and Intramedullary Nail for long bone repair
A. Khan, M. Vaughan, A. Haleem, H. Alizereej, A. Moussa, M. Khandaker, University of Central Oklahoma, US |
| Utilizing polycaprolactone nanofiber gauge with antimicrobial agents to promote deep wound healing
S. Mesiya, M.B. Vaughan, R. Wolf, M. Khandaker, University of Central Oklahoma, US |
| Flexible, High Electrode Count Polymer Fiber Neural Probes for In Vivo Recording and Treatment
A. Charlton, N. Yousefpour, A. Parrott, X. Jia, Virginia Tech, US |
| Effect of Femtosecond laser Micromachining on the Microstructure and Mechanical Properties of Biomedical Ti Alloys
M.F. Ijaz, King Saud University, SA |
|
| 4:00 | SPM Connect - Posters | |
| Frequency and Damping Noise of a Mechanical Resonator with Optomechanically Modified Effective Quality Factor
M.M. Hasan, N. Austin-Bingamon, D.C. Binod, Y. Miyahara, Texas State University, US |
| Spatially Resolved Chemical Analysis of Phase Separation in Organized Organic Monolayers by Resonance-Enhanced AFM-IR Spectroscopy
P. Moraille, Z. Ferron, C. DeWolf, A. Badia, Universite de Montreal, CA |
| Interfacial Water Layers on the Hydrated Silica Surface under Water
Y. Cai, J. Melendez-Rivera, J.D. Batteas, Texas A&M University, US |
|
| 4:00 | Energy Storage - Posters | |
| Reliability Testing of Commercial Li-ion Battery Cells for Stationary Energy Storages
D. Choi, N. Shamim, E. Thomsen, Q. Huang, A.J. Crawford, V.V. Viswanathan, D.M. Reed, V.L. Sprenkle, Pacific Northwest National Laboratory, US |
| The status and challenges in the development of sustainable batteries for energy storage applications
X.L. Li, D.M. Reed, Pacific Northwest National Laboratory, US |
| Prismatic Battery Cell Thermal Modelling Using Aluminum Nitride Components
D. Jimenez-Rivera, P. Quintero-Aguilo, University of Puerto Rico at Mayaguez, US |
| Power Reliability and Usability
T. Baker, Virtual-Paralegals LLC, US |
| Solar Powered Utility Median Barrier at Rhode Island Highways
A. Baro, E2SOL LLC, US |
| Simulation of PCM Thermal Energy Storage Units Using Lattice Boltzmann Method Coupled with Bayesian Networks
D.Y. Chen, Y.Y. Qiao, Shanghai Jiao Tong University, CN |
| Thermal Analysis of Micro-Cell Format Lithium-Ion Batteries: Building A Materials Safety Database
M. Trujillo, V. Rikka, W.S. Tang, J. Jeevarajan, UL Research Institutes - Electrochemical Research Institute, US |
| Rule-based control of thermal energy storage integrated heat pump system: field test and simulation study
Y. Qiao, L. Wang, X. Liu, B. Shen, Oak Ridge National Laboratory, US |
|
| 4:00 | Future Innovators - Posters | |
| PolyC Plastics and Composites: Enabling Future Materials Platforms With Hemp-Derived Polymers and Technologies
M.M. Sotzing, PolyC Plastics and Composites, US |
| Hidden Engines of Innovation: The Role of Emerging Research Institutions in Regional Growth
M. Foster-Bruns, Valparaiso University, US |
